|
|
|
HASS VERTICAL MACHINING CENTER:VF-3
The Haas VF-3 is a rugged, medium-sized VMC that yields full reliability and accuracy in a moderately sized machine. The VF-3 has a 40-taper cartridge spindle driven by a 20-hp vector dual-drive (Y-Delta) motor. The VF-3 produces either 75 ft-lb of torque at a low 1,400 rpm, or 250 ft-lb at 450 rpm with the optional 2-speed gearbox, and will also run up to 7,500 rpm in 1.2 seconds for finishing aluminum. The Haas control features advanced tool management, single-button features, 15-inch color LCD monitor and a USB port.
|
|
4000 Watt Amada 3015 Flying Optics Laser
Mild Steel .032'' to 1''
Stainless Steel .032 to 1/2''
Aluminum .032 to 3/8''
Maximum Sheet Size 5' x 10'
Accuracy 0.0004''/20''
High Speed Pallet Shuttle
40000 Watt
Maximum Material Weight 2,000 LBS
|
|
Amada HDS 2204 14' CNC press break
Maximum tonnage 242 U.S. tons
Maximum Stroke Length 7.87''
Open Height 19.7 ''
Throat Depth 16.3 ''
Distance Between Housing 167 ''
Ram Repeatability +/- 0.00004 inches
Bend Length 14' 1''
Approach Speed 7.87 inches per second
Bending Speed 0.78 inches second ( Max)
Repeatability L Axis +/- 0.0008 inches
Movement Range L Axis 27.55 inches
Y Axis 106.3 inches
R Axis 9.8 inches
Feed Speed L Axis 1,180 inches per minute
Minimum Command Unit Ram 0.0001 inch
Y Axis 2,362 inches per minute
Backgauge 0.001 inch
|
|
Edwards 120 Ton "Jaws V" Heavy Duty Machine
11" throat, 9-1/8 open height, 1-1/8 stroke
Punch 1-1/16 diameter thru 1" plate Built in Shear cuts 1/2" x 24", 1" x 12", or 1-1/4 square or round
Built in Angle Shear cuts 6 x 6 x 1/2 angle
Built-in Coper-Notcher (3 x 6 x 1/2)
Quick cycle time of 2.5 seconds.
|
|
EXSEL 2000 PRO BENDER
BENDING ROUND TUBING FROM 1'' TO 1.90''
ALSO FEATURES SWAGING
|
|
LANSING- G LATH
• Swing Over Bed
• Gap Swing Capacity
• Swing Over Cross Slide
• Distance Between Centers
• Spindle Speed Range
• Main Motor
• Spindle Bores
○ 28"
○ 39"
○ 19"
○ 120"
○ 20 -- 1,500 RPM
○ 20 HP
○ 4.1"
|
|
SIHR 6/3 6' X 5/16 PLATE ROLL
Will Pre Bend 1/4'' Palate At Full Lenght And Roll 3/8'' Plate To Larger Diammeters.
Rating With Material Yeilds Of : 36,000 PSI 50,000 PSI
Rolling Maximum Large Diameters : 3/8'' 5/16''
Pre-Bending 3.0 x Top Roll OD: 5/16 1/4
Pre-Bending 1.4 x Top Roll : 1/4 3/16
Will Roll 3/8 to 48'' x 6', 5/16 to 23'' and 1/4 to 6'
|
|
Software
Lee Metal Fab has a wide variety of software tools to help us in your design. Whether you have simple DFX files to very large 3-D Models, we have the software to accommodate your needs. We can also take a simple sketch or blue printed drawings and turn them into computerized files.
Software
Soild Works
Sheet Works
Cutting Shop
Design to Fab
Dr. Abe Bend
Dr. Abe Blank
Types of Files That Can Be Sent
DFX
DWG
SLDRW
SLDASM
IGES
STEP
PDF
If you can not send these formated files then you can just e-mail a drawing to us are fax it . These files do help us out to get the quote or part produced quicker, but are not necessary. |
|
Cutting Shop
Raster to Vector Conversion for all Cutting and Engraving Applications
version 3.0
SCAN and CUT... or TYPE and CUT
Draftsman Cutting Shop is the premier 32 bit raster to vector conversion program for all cutting applications. The program imports color, gray and black and white images. Cutting Shop is simple to install, easy to use and extremely fast. Scans of both sketches and silhouettes are quickly converted into high quality, ready to cut, vector drawings.
Any TrueType font is instantly outlined with long lines and arcs. Whether it is a vectorized drawing or an outlined font, complex curves are made of a series of end to end arcs and outlines are closed polygons. Images converted with Cutting Shop cut smooth and the cutting tool stays down until the outline is finished; optimizing your cutting operation.
PREPARATION - Cutting Shop has many features designed specifically for NC applications such as line offset, cuttable fills, automatic and manual tool path sorting, show direction of cut and if required, reverse it. Also, Import DXF files from low end raster to vector programs and automatically create long lines and arcs from the thousands of short vectors that these programs can create.
EDIT - Because Cutting Shop is a hybrid raster/vector program and because clean-up is always a concern, Cutting Shop comes with an impressive variety of vector and raster editing functions; stretch, scale, move, copy, delete, insert and join - about 40 of these tools are available.
EXPORT - Vectors are exported to DXF, PLT, IGES and other CAD and CAM specific formats. Vectors, raster, or the combined raster and vector hybrid image can be saved or printed. Vectors can be drawn on the raster image and the combined raster/vector drawing can be saved back as a
raster drawing.
Raster to Vector Conversion
• Convert All or Selection to Vectors
• Color and Gray Support
• Silhouette Conversion
• Sketch Conversion
• Preset and User Defineable Conversion Parameters
• Long Lines and Arcs
Fonts
• Silhouette any TrueType font
• Type on an arc or series or arcs
Raster files imported & exported:
• PCX • BMP • Tif Group 4
• Tif Uncompressed • Tif Pack Bits
• RLC • CALS Group 4 • JPG
Vector files exported
• DXF • PLT • IGES • DXB • CGM • HPG • TXT • 2D
|
|
|
|
